EVGA 122-CK-NF68 Guia do Utilizador descarregar pdf (Página 100)

Configuring the BIOS

¾ Expert

Use the

Page Up and Page Down keys to select Expert. When Expert

is selected, all timing categories are enabled for manual input. Note that

you should set the value to Optimal to use the manufacturers’

recommended values.

ª tCL: CAS# latency (options are 1 through 6).

ª tRDC: RAS#-to-CAS# Delay for Read/Write commands to the

same bank (options are 1 through 7).

ª tRP: Row Precharge time. This is the Precharge-to-Active or Auto-

to-Refresh of the same bank (options are 1 through 7).

ª tRAS: This is the minimum RAS# active time (options are 1 through

31).

ª Command Per Clock: This is the command timing setting on a per

clock unit basis (options are 1T and 2T).

ª tRRD: RAS#-to-RAS# delay of different banks (options are 1

through 15).

ª tRC: RAS#-to-RAS# or auto refresh time of the same bank (options

are 1 through 31).

ª tWR: The Write recovery time (options are 2 through 7).

ª tWTR: This is the minimum write-to-read delay with the same chip

selected (options are 1 through 10).

ª tREF: This is the DRAM refresh rate (options are Auto, 7.8uS, and

3.9uS).

Parameters Settings Current Value

Memory Timing Setting [Expert]

tCL (CAS Latency) [Auto(5)] 5

tRDC [Auto(7)] 5

tRP [Auto(7)] 5

tRAS [Auto(23)] 18

Command Per Clock (CDM) [Auto(2T)] 1T

** Advanced Memory Settings **

tRRD [Auto(4)] 3

tRC [Auto(28)] 22

tWR [Auto(7)] 5

tWTR [Auto(10)] 9

tREF [Auto] 6.1uS

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 169 170

Sem comentários

EVGA 122-CK-NF68 Guia do Utilizador Página 100